Acrylic panel manufacturer: Why is the acrylic panel have tolerance?

(The following information is only for the acrylic sheet forming method, and the corresponding thickness tolerance analysis, and the common appearance tolerances of the acrylic panel have nothing to do, if relevant knowledge, please contact our technical personnel, will introduce you for your detail)

Why does the acrylic panel have tolerance? It is especially obvious that this situation is particularly obviously referred to as the thickness of the plate material.

What is the acrylic panel?

The cast plate is the starting and casting process. The image point said that the casting process is better than tofu. In the outer frame mold, it is injected into the mold. It is pressed with a plate, and the solidification is successfully tofu. This process may wish to make a very thick plate, but the servant will be relatively bigger. The extruded plate is mechanically squeezed. The extrusion process is like a dumpling skin in the middle of the two metal rollers, and the relative thickness is average, but it cannot be pressed out of the panel, and the thickness of China is more common in 15mm.

This is a relating to the cast plate itself. Since the cast plate is the acrylic panel that dissolves the acrylic particles, it is not possible to prevent the thickness of the casting.

Partial thickness cast plate

The sergeant of acrylic finished products having a thickness of 2 mm is ± 0.4 mm;

The sergeant of acrylic finished products having a thickness of 3 mm is ± 0.5mm;

The sergeant of acrylic finished product with a thickness of 4 mm is ± 0.6mm;

The sergeant of acrylic finished products having a thickness of 5 mm is ± 0.7mm;

The sergeant of acrylic finished products with a thickness of 6 mm is ± 0.8 mm;

The sergeant of acrylic finished products having a thickness of 7 mm is ± 1 mm;

Acrylic finished sergeants with a thickness of 10 mm will be ± 2mm or more.

Cast plate process

In addition to the increase in the thickness of the acrylic finished product, the servant of the cast plate will get more and more. The juxta of the acrylic finished product of the extruded plate may be controlled at ± 0.1mm, and the acrylic panel has serviced, which is related to the material. Therefore, if others say that the acrylic panel does not have a service, it is not accurate.

The above information is extracted into the Internet. This site does not make any deletions, please contact delete if you infringe.

Acrylic panel, acrylic lens, acrylic touch panel, acrylic silk screen custom professional manufacturer, information, reprint, please explain, more information, please pay attention to Josheng.